Skip to content
ROOTREACHAll product categories

94 PRODUCT REFERENCES

Fasteners & construction hardware

Choose the product family, then specify the drawing or standard, dimensions, material, finish and quantity.

Read the sourcing requirementsCompare before requesting a quoteDownload the illustrated catalogueDownload the product list

94 of 94 references.

Threaded rods6 references

Anchors34 references

Bolts and screws24 references

Nuts and washers12 references

Construction accessories18 references

BEFORE REQUESTING A QUOTATION

Compare the specification before comparing the price

Use these category checks alongside the specifications on each reference page. They are procurement guidance, not verified performance or compliance claims for every listed product.

Can I order a fastener or anchor by photograph alone?

Use the photograph to identify a reference, then supply a dimensioned drawing or the required standard and revision. Confirm the thread, length, diameter, material, grade and finish where relevant. Visual similarity does not establish interchangeability or suitability.

How should two hardware quotations be compared?

Check that both quotations cover the same dimensions, material, finish, quantities and packing units. List any requested dimensional inspection or material documentation separately. A lower unit price is not a comparable offer when the proposed specification or quantity basis differs.

What must be checked before approving a construction anchor?

Provide the intended substrate, installation conditions, application and required project documentation. Ask for evidence covering the exact proposed anchor and intended use. A catalogue reference does not establish load capacity, installation suitability or project approval; obtain the required technical assessment before use.

Catalogue information is a starting point. RootReach coordinates sourcing and clarification; final specifications, supporting evidence and commercial terms need written supplier confirmation.

Prepare an enquiry with the reference and your requirements →
Supplier-catalogue references, not a live inventory feed. Confirm configuration and supporting evidence before approving an order. Similar names across references do not establish identical products.

SAMPLE APPROVAL & SUPPORTING EVIDENCE

What should a fastener sample approval cover?

Identify the standard or drawing revision, dimensions, thread, material and grade, and finish. Record the sample reference and agreed inspection criteria. Keep proposed equivalents separate until the buyer approves them.

What to request from the supplier

Request dimensional inspection results and the material or finish documents required by your brief. Check that their references match the proposed item and agreed order scope.

Buyer guidance from RootReach. This is not a supplier test result, certification or a guarantee of suitability. Confirm the evidence and acceptance criteria for the individual item.

Prepare a fasteners RFQReview fasteners requirementsWho coordinates your enquiry?